Advantages:

Low Breakout force.

Quick digging at minimum drag.

Large fluke area.

Repairable.

Although all POOL anchors have a high holding ability, the POOL TW anchor shows best the combination of holding power and fluke surface. The anchor has large flat flukes made out of high tensile steel plate material. The thickness varies from 15 mm up to 140 mm (depending on the anchor size).

The extreme points and the inner edges of the flukes are sharpened in order to enable them to dig in easily. To prevent the anchor from digging in too deep, the POOL TW anchor is equipped with crownplates.

An interesting result of this design is that a relative low force in transverse direction is necessary to lift the anchor.